Project 1 – Moulding from a surface The moulding relief paste was far and away my favourite medium for this exercise. The paste combines well with textiles, takes crisp imprints, remains maleable and can be coloured, stitched and worked into. It is also accepts embedded objects well. The variety of pastes available (pearl, matte, gloss […]
You are browsing archives for
Category: Project 2: Casting the internal space of a vessel
Project 2 – Casting the internal space o
After the abject failure of the homemade ‘plaster of Paris’ I purchased the real thing. I experimented with a number of spaces, choosing everyday vessels for casting from and marking or embedding them with other found objects. Bakery tray and pasta with Brusho After arranging dry pasta pieces in a bakery tray I sprinkled the […]
Project 2 – Casting the internal space o
For this exercise I selected a range of multi-coloured hand-dyed pieces of wool roving, fleece wool and yarn. All were chosen for their propensity to felt (ie, short to medium staple wools of various qualities). I used two different strategies to contain the wool. The first was to stuff an old mesh onion bag, the […]
Project 2 – Casting the internal space o
While I was waiting for a delivery of plaster of Paris, I researched homemade alternatives. A number of sources recommended a simple mixture of flour and water for a similar result. I mixed up a paste, adding some Brusho for colour. To create interesting shape and texture I poured the paste into an ice cube […]
Project 2 – Casting the internal surface
Metal parts and jewellery are frequently cast using ‘green sand’. Following some research I found various sources that suggested this could be achieved with kinetic sand. Kinetic sand is regular fine sand blended with a synthetic product, polydimethylsiloxane. This makes it behave like wet sand that can be moulded and shaped more readily than regular […]
Project 2 – Casting the internal space o
After the PVA and fabric sample I had some colour PVA left over. It seemed a shame to waste it so I used some of the scraps of hand-dyed yarn from the weavette pieces and pushed them into the beaker until the yarn was covered. I allowed the piece to dry completely in the beaker […]
Project 2: Casting the internal surface ...
Project 2 comprises the following exercises: Plaster of Paris Wool-felt PVA and yarn Kinetic sand and wax Flour paste plaster of Paris